Articles, Blog

ONE WAY CHECK VALVE

October 23, 2019


FROM OUR SUPPLY OR WET TANK WE’RE GOING TO SEND AIR TO OUR PRIMARY AND SECONDARY TANKS AND THE PRIMARY
AND THE SECONDARY TANKS HAVE ONE WAY VALVES WHEN IT’S SUPPLIED
BY THE WET TANK AIR COMES IN FROM THE WET TANK AND PUSHES ON THE
ONE WAY CHECK VALVE IT COMPRESSES THE SPRING AND AIR IS ALLOWED TO PASS BY THE VALVE BECAUSE IT UNSEATS HERE IF THERE IS A LEAK OR A LOW PRESSURE SITUATION ON THE WET TANK SIDE OF THE CIRCUIT AND THERE IS HIGHER PRESSURE IN YOUR PRIMARY OR
SECONDARY TANK THEN AIR PRESSURE WILL CLOSE THE ONE WAY CHECK VALVE AND PREVENT LOSS OF AIR BACK
THROUGH THE SYSTEM GIVING YOU A DUAL BRAKE SYSTEM VERY SIMPLE TO CHANGE OR DIAGNOSE SOMETIMES THEY GET PARTICLES IN THEM NOTICE THE PIPE THREAD ON THEM SO MAKE SURE PST AND TEFLON TAPE WHEN YOU INSERT THEM IN THE TANK AND BE SURE BEFORE YOU CHANGE THESE THAT YOU DRAIN ALL OF THE AIR OUT THE TANKS AND SYSTEM

No Comments

Leave a Reply