Articles, Blog

b48 Tutorial – Combo-stitches, basic know-how (14/15)

October 24, 2019


b48 Tutorial – Combo-stitches, basic know-how (14/15) „For 5-thread stitch thread all loopers, see overlock threading and coverstitch threading“ Place overlock-looper threads and needle threads to the left under the foot Trim the looper thread to 10 cm/4″ and let it hang in the looper area Set default settings of the stitch Chainstitch is formed with center needle and yellow thread tension Overlock is formed with left or right needle and green thread tension Upper looper overlock Lower looper overlock Chain looper Stitch length, differential feed, cutting width, presser foot pressure Rolled hem lever on N for Overlock Test Sewing Combo Stitches Tip: Begin sewing with needles up so the knife is up as well Place fabric directly in front of the needles and along the knife Check stitching, adjust if required The 5-thread safety seam has limited stretch and is ideal for woven fabrics or knits that need stabilization

5 Comments

  • Reply Alex Zh October 18, 2017 at 4:06 pm

    Шов №17

  • Reply Lilit Kujoyan October 25, 2017 at 7:22 pm

    Замечательная швейная машина

  • Reply melanie anna-mania green February 7, 2019 at 7:09 pm

    the music is un-bearable!

  • Reply melanie anna-mania green February 13, 2019 at 8:02 pm

    so when are you going to do something about the music? it's useless!

  • Reply Rhoda Wright October 1, 2019 at 12:48 am

    I hate these videos! I have no idea what the person is doing and the music makes my ears bleed!

  • Leave a Reply